2H Heavy Hex Nuts are the most common. Let's take a look at the basics of hex nuts and find out why hex nuts are the most commonly used.

On the machine, there are not enough places to install the nut, and the space for the wrench to turn the nut is very narrow. For hexagonal nuts, you only need to turn the wrench 60 degrees at a time to slowly tighten the nut, while quadrilateral nuts need to be turned 90 degrees at a time.

Making the nut hex is all about making the most of the material. Because from a strength point of view, a large nut is stronger than a small nut. In the past, nuts were usually ground out of round material. The same round rod, related to it is the introduction of the hex nut. Because it is easy to use and improves the utilization rate of materials, it is the most used in the market.

Although the hexagonal nut is just a small fastener, it is very frequent in daily use and has its presence in many scenes. Workman No. 1 serves as a one-stop fastener platform, stainless steel, and carbon steel nuts are available.