Hexagonal slotted nuts are also divided into many types in terms of materials, so do you know how to use hexagonal slotted nuts and how to disassemble them? Let's introduce to everyone below Stud Bolt Manufacturer  .

The purpose of the hexagonal slotted nut is to fix the front and rear axles of the vehicle by tightening the screws on the front and rear axles, thereby fixing the frame and the tires together. To fix the hex slotted nut, the split pin must pass through the middle of the axle screw. Usually, it is necessary to drill the axle screws at both ends. The diameter of the hole and the groove width and depth of the hexagonal slotted nut In order to select the specifications of the cotter pin, when the selected wheel axle screw and cotter pin are more matched with the hexagonal slotted nut, the nut will pass the front wheel fixing frame through the axle screw, The split pin passes through the hole fastener of the axle screw. Hold the hex slotted nut so that the hex slotted nut will not loosen even when the vehicle is driving.

The disassembly operation of the hexagonal slotted nut: If the head of the hexagonal slotted nut is slightly higher or flat than the plane of the fixed part, a hexagonal nut with a slightly smaller outer diameter than the head of the hexagonal slotted nut needs to be fixed to the hexagon On the slotted nut head, finally spot weld the nut with the hexagonal slotted nut head. After cooling, use a movable hand to tighten the nut, and then take out the hexagon socket bolt.